200L 全自動開灌旋一體機

設備概述：

本機專門針對50-300kg的液體桶包裝而設計，設有可視窗，自動升降移門，自動完成進桶、移門開、關，自動識別桶口、

自動開蓋、自動灌裝、自動旋螺紋蓋并測漏、自動上防水蓋（可選）、自動出桶。本機采用可編程控制器（PLC）進行控

制，觸摸屏操作。變頻調速器，控制能力強，自動化程度高，采用特殊裝置，無桶不灌裝，對不準桶口不灌裝等功能，使

機器的機電一體化得到了完美的表現。

灌裝頭部：自動定位桶口灌裝，裝嘴下部有接液斗，防止物料滴漏。

開蓋、旋蓋部：不損蓋、不傷蓋、緊蓋密封程度高。

測漏部：對旋緊蓋后的桶口進行測漏，判斷桶蓋是否旋緊。不合格報警。

主要技術參數：

200L automatic opening, filling and rotating machine

Equipment overview:

This machine is specially designed for 50-300kg liquid barrel packaging. It is equipped with a visual window, automatic lifting and sliding door, automatic barrel feeding, sliding door opening and closing, automatic identification of barrel opening, automatic lid opening, automatic filling and automatic rotation. Threaded cap and leak detection, automatic waterproof cap (optional), automatic out of the barrel.This machine adopts programmable logic controller (PLC) to control, touch screen operation. Frequency conversion governor, strong control ability, high degree of automation, using special devices, no filling without barrels, no filling if the barrel mouth is not correct, et c., so that the mechanical and electrical integration of the machine has been perfectly displayed.

Filling head: automatic positioning of the barrel mouth for filling, there is a liquid hopper at the lower part of the filling mouth to prevent material leakage.

Opening and screwing parts: no damage to the cover, no damage to the cover, and high sealing degree of the tight cover.

Leak test section: Leak test on the barrel mouth after the lid is tightened to determine whether the barrel lid is tightened. Unqualified alarm.

The main technical parameters: